iSMA-B-4TO-H

About the product

The module has 4xTO (Triac Outputs). TO can direct control 24-230 V AC voltage with max. 0,5 A load.Suitable for faster switching and longer lifetime. Can be hand operated.
The module is factory-equipped with the two most popular open communication protocols: Modbus ASCII/RTU and BACnet MSTP, which are selected using DIP switches.
Addressing the modules is via rotary switches, which facilitates and accelerates the process of commissioning the system.

Built-in mini USB allows for initial configuration of the unit without power supply.

This module is fully compatible with any Modbus or Bacnet system including the following: Tridium Jace3, Jace6, Jace8000 Compatible, Trend IQ3, IQ4 Bacnet IP Compatible, Siemens PX range, Cylon Bacnet controllers, Schneider Electric StruxureWare Bacnet controllers, OSS NeOSS building management controller, Priva Blue ID, Distech EC Bos, DELL EDGE GATEWAY 5000, Compatible with any Honeywell Centraline Hawk, Delta Controls Compatible IO Modules

Inputs & Outputs:
4x Triac Outputs (4TO)

• Triac¬†outputs:¬† 0,5 A @ 24 V AC, 0,5 A @ 230 V AC

Platform

• Cortex-M3

Communication

• Interface RS485 half duplex
• Up to 99 devices on the bus
• Protocols: Modbus or BACnet
• Baud rate: 2400 to 115200 bps

Power supply

• 24 V AC/DC

Housing

• Dimension: 35x110x62 mm
• Construction: plastic, self-extinguishing (PC/ABS)
• DIN rail mounting (DIN EN 50022 norm)
• Cooling: internal air circulation

Environments

• Operating temperature: -10¬∞C to 50¬∞C
• Storage temperature: -40¬∞C to 85¬∞C
• Relative humidity: 5 to 95%, no condensation
• Ingress Protection Rating: IP40 ‚Äì for indoor installation

Do you have a question about this product?

In the DOWNLOAD session you can find:
The ISMA driver for Niagara, which contains the ISMA device Palette
ISMA configurator which is needed for updating firmware and configure modules

For any help please contact our support here