RUT241 IoT/BMS 4G Router with WiFi and 2 Ethernet Ports

About the product

Forget the pain of not having a reliable internet connection.

We know how frustrating it is not to have an internet connection either on-site or when you are on the move.

We also know that connecting all of your sites safely to the internet can be complicated and expensive. 

Only for setting up VPNs and Static IP addresses to be able to access your sites, you might need a full CISCO networking course.

Our Teltonika RUT240 Router will enable you to have secure and reliable internet access across all your sites.

For one-third of the cost of a site visit, you will be able to have constant internet access on site.

You will be able to install the RUT241  and have it up and running without any support. The documentation and our knowledge base articles are all you need.

You will get with the RUT241a SIM card (2G/3G/4G) industrial router with WiFi and 2 Ethernet Ports.

You will also get a safe way to connect to your site via the RUT241 and Zerotier service. Zerotier is a service that allows you to create networks between devices connected to the internet, which means that you can access any of your sites remotely via VPN. We prepared a step by step article on how to achieve this here.

You will also be able to Configure the RUT241 as a local MQTT broker allowing you to move your Modbus data to the Cloud.

There is a growing demand for having internet access everywhere. We also know that in our controls industry, our clients are starting offering Internet-enabled sites by default. Allowing them to provide remote maintenance, avoid site visits and more and more services online.

We know how unpleasant and costly it is when you have to travel to the site to check the controls, whenever something goes wrong. We also know that the lack of the Internet when you are actually on site. 

Hence we have partnered with Teltonika so we can offer you the most advanced, industrial IoT routers. 

With this router RUT241 you will be able to connect to any remote site without spending your time and budget. 

The RUT241 is an industrial router used in the controls and IoT industry which allows you to have constant internet connectivity everywhere you go. 

When installed on-site, it will allow you to have internet access to your controls equipment whether you are using a Jace 8000 or any other WIFI enabled controller.

With the RUT241 router you will be able to:

• Have a safe and permanent connection to the internet for your laptop, so you never have to worry about lack of connectivity, even if you are in the basement of a building.
• Have a safe and easy way to connect to any remote site and run a diagnosis, thus avoiding unnecessary travel.
• Have a safe and fully documented and supported way of moving metering data from a site into the cloud without any BMS.

So if you are looking to avoid a stressful visit to the site or being without an internet connection when you need it most, then this is for you.

With the RUT240 you get stable internet wherever you go.

You can deploy it on any site to monitor the status of your controls in real-time, extract data, modify setpoints etc.

You will also be able to extract metering data directly using Modbus IP and MQTT. Have a look at this article we prepared for you.

The RUT241 is fully documented and supported by Innon.

Technical Specifications

RUT241 is a compact industrial 4G (LTE) router equipped with 2x Ethernet ports, WiFi and RutOS software for advanced networking solutions.

RUT241 is an all-time bestseller industrial 4G LTE Wi-Fi router for professional M2M & IoT applications.

It delivers high performance for mission-critical cellular communication in rigorous environments.

RUT240 is widely used for 4G backup, Remote Connection, Advanced VPN, and tunnelling services in IoT networking solutions.

WAN failover ensures automatic switch to alternative backup connection in case of any connectivity issues.

The Wi-Fi is functional in both: Access point and Station mode at the same time.

Do you have a question about this product?

STANDARD PACKAGE CONTAINS

• Router RUT241
• UK PSU
• 2 x LTE antennas (swivel, SMA male)
• 1 x WiFi antenna (swivel, RP-SMA male)
• Ethernet cable (1.5 m)
• QSG (Quick Start Guide)
• Packaging box

Useful Articles

• How do I set up the router to connect to Modbus Slave devices directly?
• How do I wire the RS485 port on the RUT955?
• How do I create a VPN/SD-WAN with Zerotier and Teltonika?
• What options do I have to work with Modbus?
• How do I set up the router to work as a RS485 to TCP Modbus gateway?
• How can I get Modbus data on the local or a remote MQTT broker