Skip to content

RUT951 IoT/BMS Industrial Dual SIM 4G Router with WiFi and 4 Ethernet Ports

SKU RUT951
Original price €511,95 - Original price €511,95
Original price
€511,95
€511,95 - €511,95
Current price €511,95

About the product

We know how unpleasant and costly it is when you have to travel to site to check the controls, whenever something goes wrong. We also know that the lack of Internet when you are actually on site. 

Hence we have partnered with Teltonika so we can offer you the most advanced, industrial IoT routers. 

With this router RUT950, you will be able to connect to any remote site without spending your time and budget. 

The RUT950 is an industrial dual SIM router used in the controls and IoT industry which allows you to have constant internet connectivity everywhere you go. 

When installed on-site, it will allow you to have internet access to your controls equipment whether you are using a Jace 8000 or any other WiFi-enabled controller.

With the RUT950 router you will be able to: 

  • Have a dual SIM router which will give a safe and permanent connection to the internet for your laptop, so you never have to worry about lack of connectivity, even if you are in the basement of a building.
  • Have a safe and easy way to connect to any remote site and run a diagnosis, thus avoiding unnecessary travel.
  • Have a safe and fully documented and supported way of moving metering data from a site into the cloud without any BMS.

So if you are looking to avoid a stressful visit to the site or being without an internet connection when you need it most, then this is for you.

With the RUT950 you get stable internet wherever you go.

You can deploy it on any site to monitor the status of your controls in real-time, extract data, modify setpoints etc.

You will also be able to extract metering data directly using Modbus IP and MQTT. Have a look at this article we prepared for you.

The RUT950 is fully documented and supported by Innon.

RUT950 is a compact industrial 4G (LTE) router equipped with 4x Ethernet ports, WiFi, Dual-SIM and RutOS software for advanced networking solutions. 

- RUT950 is a high-performance industrial 4G LTE Wi-Fi router designed as a Main/Backup internet source and guarantees a reliable internet connection with high data throughput and data redundancy.

-Compatible with the Teltonika Networks Remote Management System (RMS) for easy and secure monitoring.

-It has four Ethernet ports, two external SIM holders, digital I/O, and signal strength status LED indicators.

-Powered by RutOS - a unified operating system for all Teltonika Networks routers, this device is highly secure and customizable.

Do you have a question about this product?


 

MOBILE
Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
APN Auto APN
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list Operator black/white list
Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display

 

WIRELESS

Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi security WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SSID SSID stealth mode and access control based on MAC address
WiFi users Up to 100 simultaneous connections
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

 

ETHERNET

WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Relay
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancing Balance your internet traffic over multiple WAN connections
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)

 

SECURITY

Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi security WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
VLAN Port based and tag based VLAN separation
Mobile quota control Set up custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

 

VPN

OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
SSTP SSTP client instance support
ZeroTier ZeroTier VPN

 

MODBUS

MODBUS TCP SLAVE
ID range 1-255
Allow Remote Access Allow access through WAN
Custom registers Modbus TCP custom register block requests, which read/write to a file inside the router, and can be used to extend Modbus TCP Slave functionality
MODBUS TCP MASTER
Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MODBUS DATA TO SERVER
Protocol HTTP(S), MQTT, Azure MQTT

 

MQTT GATEWAY

MQTT gateway Allows sending commands and receiving data from Modbus Master through MQTT broker
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)

 

IoT PLATFORMS

Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

 

SYSTEM CHARACTERISTICS

CPU Atheros Wasp, MIPS 74Kc, 550 MHz
RAM 128 MB, DDR2
FLASH memory 16 MB SPI Flash

 

FIRMWARE / CONFIGURATION

WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools SDK package with build environment provided

 

INPUT/OUTPUT

Input 1 x Digital non-isolated input (on 4 pin power connector)
Output 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
Events SMS, EMAIL, RMS

 

POWER

Connector 4 pin industrial DC power socket
Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Power consumption < 2 W idle, < 7 W Max

 

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet 4 x RJ45 ports, 10/100 Mbps
I/O’s 2 Inputs/Outputs pin on 4 pin power connector (available from HW revision 1600)
Status LEDs 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
Power 4 pin power connector with 2 pins for Input/Output
Input/Output 2 programmable Inputs/Outputs
Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
Reset Reset/restore to default button

 

PHYSICAL SPECIFICATION

Casing material Aluminium housing, plastic panels
Dimensions 100 x 110 x 50 mm (L x W x H)
Weight 280 g
Mounting options DIN rail (can be mounted on two sides), flat surface placement

 

OPERATING ENVIRONMENT

Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30
MTBF 270000 h
REGULATORY & TYPE APPROVALS
Regulatory CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, TRA approval, REACH, DNV GL, Declaration of Software Security, Thailand NBTC, Ukraine UCRF, WiFi Certified, SDPPI (POSTEL)
Operator AT&T, Verizon

 

EMI IMMUNITY

Standards Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2018), ANSI C63.4 (2014)
ESD EN61000-4-2:2009
RS EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT EN 61000-4-4:2012
Surge immunity (AC Power Line) EN 61000-4-5:2006
Surge immunity (Ethernet ports) EN 61000-4-5:2014, clause 7.1 of ITU-T K21
Transient and surges ISO 7632-2:2004
CS EN 61000-4-6:2009
DIP EN 61000-4-11:2004

 

RF

Standards EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C, FCC 47 CFR Part 22H, FCC 47 CFR Part 24E, FCC 47 CFR Part 27

 

SAFETY

Standards IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310

 

ENVIRONMENTAL

Ingress Protect LST EN 60529:1999+A1+AC:2002
Vibration Class guideline-DNVGL-CG-0339:2016
EN 60068-2-6:2008

 

STANDARD PACKAGE CONTAINS

  • Router RUT950
  • UK¬†PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 2 x WiFi antennas (swivel, RP-SMA male)
  • Ethernet cable (1.5 m)
  • QSG (Quick Start Guide)
  • Packaging box

 

    Documentation & Downloads for RUT950 style=

    Delivery times

    For uk clients we deliver all goods ordered by 14:00 in the next working day.

    Request a quote